Garage door cable repair in Gateway

Cables give some warning before they fail: broken strands, rust near the bottom corner, or a door that no longer closes level.

Call (239) 475-2348

In short

A garage door in Gateway that hangs crooked, or has a loose cable lying by the track, should not be moved with the opener. The technician secures the door, replaces both lift cables, checks the drums and springs, levels the door and gives the price before starting.

Cable problems in Gateway

Gateway is a planned community of golf course villages, Pelican Preserve, Stoneybrook at Gateway and Hampton Park, and most of its homes were built from the 1990s on. Those garages have wind-rated doors with steel bracing, and that extra weight rests on the two lifting wires, so cables and drums must be properly sized. After twenty or more years of humidity, the original cables on many of those doors are rusting where they anchor at the door's lowest corner, and a few broken strands there are the warning sign. Lakes and preserves throughout Gateway keep the air damp, which speeds the process. Summer lightning storms bring outages, and a heavy door raised by hand and lowered unevenly can throw a cable off its drum. Spring breaks are the other common cause. If a door will not lift after a loud bang, leave it closed and call a technician.

Signs of a cable problem

Each side of the door has a steel lift cable that runs from a bracket at the bottom corner up to a grooved drum on the spring shaft. The signs of trouble are easy to spot once you know where to look: broken strands sticking out like wire bristles, rust where the cable meets the bottom bracket, a cable hanging in a loose loop, or a door that sits an inch or two lower on one side. A door that shudders as it lifts, or stops and reverses for no clear reason, may have a cable wound unevenly on its drum.

A repair that needs the right tools

Resetting or replacing a cable means taking the tension off the springs, and on a torsion system that is done with steel winding bars, one quarter-turn at a time, with the door clamped in place. Locking pliers on the track and a pair of screwdrivers are not a substitute. Most injuries with garage doors happen during exactly this kind of home repair. The safe course is simple: leave the door alone, keep people away from it, and let a technician release the tension in a controlled way.

How a cable repair is done

A proper repair finds out why the cable failed. If it rusted through, the bottom brackets and the other cable are in the same condition. If it jumped the drum, something made the door go slack on one side: a weak or broken spring, a worn drum, a bent track or an object under the door. That cause is fixed along with the cables. New cables are fitted on both sides, the door is levelled, spring tension is set, and the travel and force of the opener are checked so it stops pushing against a door that is already closed.

Around Gateway

  • Golf course villages: The original Gateway neighborhoods around the country club, with homes from the late 1980s and 1990s.
  • Pelican Preserve: A large 55-plus community on the north side with villas, single-family homes and its own town center.

See the full Gateway service area.

Leave the door where it is and call.

A door with a broken spring or cable can drop suddenly. Leave it closed, keep clear, and call. We'll tell you whether it's safe to use and get a technician scheduled.

Call (239) 475-2348
Call (239) 475-2348